Pedestal table base – It has been very popular. Pedestal table base features simple yet strong design at high quality to last long period of time. Different designs ideas are yours. Stylized and attractive pedestal table base traditionally consist of a round table on top of a base. The base typically has four legs and four supports to hold the cap.
In pedestal table base, place plywood panels flat on a work surface. Measures the center of one end of 24 inches (60.96 cm) in each panel with measuring tape and mark with a pencil. Draw a notch 3/4 inch (1.91 cm) by 14 inches (35.56 cm) directly up to the length of 28 inches (71.12 cm) of the panel from the center mark on each panel using a measuring tape, a square and a pencil.
20 Picture Gallery: Pedestal Table Base Ideas
Notch Cut 3/4 inch (1.91 cm) by 14 inches (35.56 cm) of each panel using a jigsaw. The notches are interconnected to form an X-shaped assembly that will be the basis of the pedestal table base.
Draw a concave curve in each of the panels of 28 inches (71.12 cm) using a flexible curve ruler and pencil. The curve forms the outer shape of the legs and table supports. Make the crook so that it is smooth and elegant. Cut each curve using the jigsaw.
This post topic: Table