Making Heavy Duty Lounge Chair

Feb 19th
Mid Century Lounge Chairs Folke Ohlsson At 1stdibs Heavy Duty Throughout Heavy Duty Lounge Chair Making Heavy Duty Lounge Chair
Mid Century Lounge Chairs Folke Ohlsson At 1stdibs Heavy Duty Throughout Heavy Duty Lounge Chair Making Heavy Duty Lounge Chair

Heavy duty lounge chair are popular pieces of outdoor furniture. These chairs come in a variety of shapes and styles and can be as big or small as needed. A simple armchair, also known as a book chair, can be done quickly at home with some tools. Because it’s easy, this kind of armchair can easily be moved and can be done at home with few materials and tools.

Instructions

25 Picture Gallery: Making Heavy Duty Lounge Chair

Place two 1-inch-by-12-inch pieces of wood on the ground. Measure and cut each to 3 meters in length. Place a tape measure at the end of one of the heavy duty lounge chair at the center. Measure 12 inches from the end. Draw a short line to mark this place on the tree. Place a drill at the selected location and drill a hole. Make sure the hole is large enough that a jigsaw blade fits into it.

Related:   How to Design Floating Lounge Chair

Draw a rectangle that is 1 inch wide and 4 1/4 inches long around the hole with a tape measure. Place a jigsaw in the hole and cut the rectangle out of the board. Set the board aside. Place a tape measure of heavy duty lounge chair at the end of the second board at the center, and measure 12 inches from the edge. Draw a line on this length to mark the location. Place the end of a tape measure on the line being pulled. Measure 2 1/8 inches to the right, which should be to the edge of the board. Draw a straight line with a straight edge. Repeat steps to create a line on the left side of the center marker.

Related:   Wrought Iron Lounge Chairs Outdoor Ideas

This post topic: Lounge Chairs

Other Interesting Things About Lounge Chairs Photos