Big party expect the baby of the family, when you can entertain your friends with kids folding table and chairs lightweight, so that the little ones can facilitate portability. Very little material is required for construction.
The chairs: You can build any number of kids folding table and chairs, if you have power tools, can produce uniform duplicate parts with production methods. Note that the ends of the studs are flush with the outer face of the legs and the rear lower projects approximately 7-8″ from each side of the hind legs. Except where the parties are pivoted, the holes should be drilled to a setting with light pressure; the rest should be slightly higher.
12 Picture Gallery: Make Kids Folding Table and Chairs
The table of kids folding table and chairs: The construction of the table is similar to the chairs. Note that the cross members at the ends are machined to have adjusted. Holes in 1/2 “legs help keep it firm. Below and bottom frame should be ready for installation at the same time as the rest of the component parts. Holes on which turn table, are made larger, and the notches on the opposite end are made by drilling first holes 5/8 “, then sawn from the edge.
This post topic: Furniture