The wrought iron gates are usually having a Baroque style, with its machined metal and turns that give a complicated elegance to any garden. This complexity is only surface, as most doors have hinges very simple systems, making installation is a project that anyone can do. By sliding the hinge screws hook-shaped in small barrels attached to the support columns of the door, you’ll assemble the wrought iron gates in minutes.
Screwing the hinge plates to end posts, screws passing through pre-drilled holes in each. Place a washer under the head of each screw and tighten it by hand until it stops. Sliding the hinge screw in each of the holes in the side panel or panels of the door, by adding a washer and nut to each. Turn the screws so that each bent head pointing down.
Insert a ball bearing into the barrel of each hinge plate. Lift the door panel with the help of an assistant and lower hooks hinge screws up the barrels of the plates of this. Do the same with the second door panel if it is a double door. Tightening or loosening the nuts with a wrench to make sure the door is level wrought iron gates.
11 Picture Gallery: How to Install Wrought Iron Gates
This post topic: Wrought Iron Fence